Linear Feet to Square Feet Calculator (2024)

FAQs

How to convert linear feet to square feet? ›

Option 1: Multiply the length and width in feet. For example, a 24x36 (in) drawing would be 2 x 3 = 6 square feet. Option 2: Multiply the length and width in inches, then divide by 144. For example, a 24x36 (in) drawing would be 24 x 36 = 864, then 864 ÷ 144 = 6 square feet.

Identifying a linear foot is right in the name. Technically, a linear foot is a measurement that is 12 inches long (so, one foot) and that is measured in a straight line, which is why it's called linear.

Therefore, you would need approximately 480 linear feet of baseboard for a 1000/2000 sqft house with an 8-foot ceiling. Remember that this is an estimate, and the actual amount of baseboard needed may vary depending on the specific layout of the house, the presence of doors and windows, and the type of baseboard used.

You can divide the total square footage by the width of the material to get the linear feet required. If we take the earlier result of 200 square feet, and then divide that by a material width of 3 feet, then we need 66.7 linear feet of material. You can round that up to 67 linear feet.

A linear foot is a unit of measurement that describes length, while a square foot describes area. Generally speaking, a linear foot is used to measure length along one side or axis, while a square foot is used to measure an area enclosed within four sides.

Depending on the complexity of your deck you may want to add 10% for cut off waste (Example: 10 ft. x 10 ft. = 100 square ft. x 2.28 = 228 linear feet).

There are 20 linear feet in a 10x10 kitchen.

A linear foot is a 12-inch (one-foot) straight measurement of length. It's that simple! It's the same size whether you're measuring space in a U-Pack moving trailer or working on a home improvement project. You might use linear foot measurements for baseboards, crown molding or fencing.

To calculate feet squared (or sq. ft. for short), determine the length and width of the area you are working with, measured in feet. Multiply the length by the width and you'll have the square feet. Here's a basic formula you can follow: Length (in feet) x width (in feet) = area in sq. ft.

How much is 4 linear feet? ›

You need 2 measurements of linear feet, the length and width of the area you want to convert to square feet. Now multiply those 2 numbers together (LXW=sq. ft.)

How do you convert square feet to linear feet? Total area in square feet is just the width of your boards times the total length in linear feet. 100 linear feet of 6 inch wide board would cover 50 square feet.

Adding the measurements provides you with the area needed for baseboard trim. Find the area (length times width) and divide by 12 for linear square feet of each of your rooms because baseboards come in this measurement.

There are 20 linear feet in a 10x10 kitchen. Simply divide your 10x10 kitchen price by 20!

One foot is one linear foot. If your tape measure doesn't list feet, just divide the total number of inches by 12 to convert to feet. For example, if you measure 96 inches in length, 96/12 = 8, so you would have 8 linear feet.

Linear feet (often called Lineal feet) are the same as regular feet. No conversion is necessary. If something is 6 linear feet tall, it is 6 feet tall.